This profile has not been claimed by the business owner or representative.
Claim this business to update business information, get appointment requests, engage visitors with web chat, and more!
Raise3D
- Business Services
- Irvine, CA
About this business
Location details
43 Tesla, Irvine, CA, 92618, United States
Get directions| Weekday | Schedule | Status |
|---|---|---|
| Mon | 9:00 a.m. to 6:00 p.m. | |
| Tue | 9:00 a.m. to 6:00 p.m. | |
| Wed | 9:00 a.m. to 6:00 p.m. | |
| Thu | 9:00 a.m. to 6:00 p.m. | |
| Fri | 9:00 a.m. to 6:00 p.m. | |
| Sat | Closed | |
| Sun | Closed |
RecommendedRaise3D Technologies Pro 2 Plus has helped us Poseidon Ocean Systems create 3D models of our large caging systemsOne of our innovations is a new hybrid (steel and HDPE) pen system designed to meet Norwegian aquaculture standards while taking advantage of modern materials and construction technologies to provide a more robust, modular, and effective system for future developments. To display our design and to allow clients to fully understand the modular design and new innovative technologies that are provided by the hybrid s... read more
We own and operate three Raise N2's and they have been absolute workhorse printers for us. We print 100% of our products in ABS and the print failure rate on these machines is extremely low. That's critical when you have product deadlines and customers waiting for their project or kit parts. We're very happy with our investment in Raise 3D N2 printers
I've had an N1 for almost 3 years now, and it has been a fantastic printer - 99% of the time, it just works. I print pretty much exclusively in ABS.
I've had a Raise3d N2+ for quite some time now. The fit and finish on it is top notch. Yes, it is a pricey printer, but it is SOLID and well made. I've put thousands of hours on the unit, with very little to speak of for maintenance - lubing rails and cleaning mostly. Off of the pallet it was ready to print, does an excellent job on most models, with a variety of filaments. The software included does the job just fine and is a worthy slicer. The onboard interface does what it needs to without issue. Support has always answer... read more
The N2 has changed the way we create our replicas. everything from a small kit to a full size Curiosity rover replica.
The N2+ has blown open the doors for what I can do. I made this main form in ABS on the N2+, and it was a massive time saver. I use it constantly for main sub structures and testing build assemblies. http://www.mystery10.com/project/mcquarrie-sandcrawler/
We have a N2 and a N2ProPlus. Had some problems with the N2 for a while. All is well now. The N2 is about a year and a half old. the N2 Pro Plus is only about 2 months old and is working great.
Raise 3D Pro 2+ is a total garbage, it did not make a single successful print within last 6 months. PLA and PVA melts inside the extruder and jams all the time. Print quality is terrible and layers are very irregular. The buildtak on the print surface works fine, but it is a nightmare to remove any big print from it. The touchscreen died after 2 months and I've waited over 1 month to get it fixed. The printer is equipped with super silent stepper motors but it is also equipped with a cooling fan as loud as an F-16. Wouldn't ... read more
We have been running Raise3D printers for a couple years now, using materials like PolyFlex, NinjaFlex, PETG, ABS, Nylon and PLA. Most of the parts we’re making are made from NinjaFlex and they are being used as production parts for some of our products. We have a total of 3 machines currently: One N2 and two N2 Pro’s, with the N2 being in operation for about a year. We’re actually estimating a 2 year payback period based on all the parts we’re printing. So far so good!
Frequently asked questions about Raise3D
How is Raise3D rated?
Raise3D has a 4.5 star rating with 75 reviews.
When is Raise3D open?
Raise3D is closed now. It will open at 9:00 a.m.
Need help? Contact us.
Speak with a specialist to learn how you can grow with Birdeye. We are reachable at profiles@birdeye.com